Fabrication a higher level of Blooms Taxonomy

Bloom’s Taxonomy in its various forms represents the process of learning, creating is the highest level of that process in the cognitive domain. Equally important is how to visualize the process while fabricating raw materials to gap the needs assessment for the given task. A zealous student in my class was faced with the predicament of servicing an older vehicle without any replacement parts available. To my amazement he fabricated an exhaust system that exceeded my expectations and convinced me that his learning journey is now more outcomes based over competency. 

Song fabricates new parts in place of  obsolete replacements

RX-7 Body Kit

!993 RX-7 JDM last day as a street car

Rx-7 after students remove front clip

Students car finally begins the highly anticipated conversion to a modified track car. The car started out as a 1993 Mazda RX-7 JDM but will soon receive a new wrapped body kit, 18” wheels and drivetrain. Excitement builds in the shop as students remove the original front clip from this once red RX-7. Body kit  is receiving final custom touches before installation in the very near future! Stay tuned for developments on this exciting project!                                                                 

There is always time for fun after the class work is done!

Andy gets a little help moving the Indy car back into the shop!

 After pushing the car to its limits around the track Andy pulls in to the shop for some quick adjustments to the fuel system before attempting another lap. When asked about safety of high performance cars Andy emphasizes that it does not matter if he is driving his new GTR on the Road or pushing the limits of the Indy car in his next race, safety is always on his mind and is top priority to being successful when behind the wheel of either car.  

Safety! It's everyone's responsibility

General Automotive Repair Safety Tips

 *PLEASE NOTE: Don’t tackle any job that you may not feel comfortable performing. It may result in an injury and likely cost more than it would have if you had taken the vehicle to a professional for service.

What's wrong with the picture above? Safety is everyone's responsibility

1.  To prevent burns, be sure to begin auto repairs on a cool engine. 
2. When working underneath a vehicle or using power tools or pressurized systems, ALWAYS wear eye protection. 
3. DO NOT wear jewelry or loose clothing when working over an engine or troubleshooting an engine that is running. 
4. To prevent the vehicle from rolling while working on it, always set the parking brake and block the tires. 
5. Use gloves; mechanic, nitrile, rubber, or equivalent while working with fluids, dust or grease. 
6. Ensure all locking devises are engaged on all support equipment while working under a vehicle. 
7. Always use jackstands to support a vehicle when working underneath it. 
8. In case of emergency, be sure to keep a fire extinguisher in your shop area. 
9. NEVER smoke when working on a vehicle. 
10. When replacing any electronic components, make sure the ignition key is in the “off” position and use a static strap to avoid “spiking” the system. 
11. Never work on a running vehicle in an enclosed area, a proper ventilation or hose exhaust system that is connected to the tailpipe and routed outside is vital. 
12. Keep your hands clear of the cooling system fan at all times. Even though the ignition key is turned off, the electric fan will still engage on many vehicles until the temperature of the coolant in the radiator has cooled down. 
13. Never remove the radiator cap while the cooling system is hot. Always allow a couple of hours for the engine to cool before opening any part of the cooling system. 
14. Use the proper tool for the procedure. 

CREATIVE COMMONS

What is Creative Commons?
Creative Commons helps you share your knowledge and creativity with the world.

Creative Commons develops, supports, and stewards legal and technical
infrastructure that maximizes digital creativity, sharing, and
innovation.


 Jims AutoShop 101 by Jim Berladyn is licensed under a Creative Commons Attribution 4.0 International License. Based on work at http://jimsautoshop101.blogspot.ca/

More information may be found on the Creative Commons Website Below

Click this LINK for CC Website

AIR BAG MODULE AND PRE-TENSIONER SEAT BELT DEPLOYMENT PROCEDURES

Operation

A front airbag system contains a hefty nylon bag, which is inflated and deflated rapidly in the result of a severe front end collision. The drivers airbag is contained in the centre pad of the steering wheel, and the passengers airbag is in the upper left of the dash

When do they deply?

The airbag's deployment is controlled by several sensors that detect the event and harshness of a frontal crash. When the airbag computer determines that the airbag should be deployed, the system initiates an inflater unit that burns chemicals very quickly to produce large volumes of inert gas to inflate the bag.

How to dispose of airbags?

 If an airbag is removed from vehicle but has not been activated we cannot simply discard them in the trash, we must safely activate them externally. Below is a link on how to safely dispose of airgbags using a SST.

Click this LINK for safe procedures on Airbag deployment

Video above is from my previous class deploying an airbag, Note the airbag was NOT secured tight enough in the vise and landed next to the concrete wall.

Students take on a BIG challenge early in the course!

Andy and radiator he just removed from F-350 Diesel

 The BCIT Ford F-350 sprung a coolant leak and required a new radiator. The challenge was offered to my class and the students overcame the enormous job of replacing the radiator that was even challenging for a licensed technician!